In-ground pools in Gilbert, with costs and barrier rules up front.
Tell us about the pool you want in four short steps. We pass your request to independent local pool builders who can visit and quote it. It's free, and you don't have to hire anyone.
Free, no-obligation quotes
Concrete, fiberglass and vinyl pools
Takes about a minute; nothing is paid here
Step 1 of 4Free quote
Request sent.
Here's what happens next: local pool builders review your details and contact you to arrange a site visit and quote. Compare them and choose whoever suits you, or no one at all.
Pool projects you can get quoted in Gilbert
In the East Valley, a backyard pool is a practical way to get through the summer. The right type depends on your lot, budget and how much upkeep you want.
Concrete (gunite) pools
Built on site and shaped to fit almost any yard, with options like tanning ledges and spas. They cost the most and take the longest to build.
A factory-made shell set into the excavation, which shortens construction. Shapes and sizes are limited to the manufacturer's molds, and delivery needs access for the shell.
The lowest upfront cost. Liners need replacing periodically, and strong sun is hard on exposed materials, so ask about liner life and replacement cost.
Angi's 2026 data puts the national average in-ground pool at about $65,909, with most homeowners paying between roughly $44,500 and $87,350. Pool type is the biggest single factor, followed by size, site conditions and extras.
In Gilbert, small lots and block-wall backyards can limit equipment access, and hard soil layers found during excavation can add cost. Use these ranges to check quotes; they are not quotes.
Pools in Gilbert are permitted through the Town of Gilbert Development Services department. Plans submitted for a pool permit must show the pool's outline and location, distances to lot lines and structures, doors and windows that open onto the pool area, and the location, height and construction of the pool barrier.
The Town's Land Development Code requires every pool to be enclosed by the walls of the house or by a solid wall, chain link or wrought iron fence between 5 and 6 feet high, with no openings a 4-inch sphere can pass through or under. Gates must be about the same height as the fence and be self-closing and self-latching. In residential districts, pools must be in side or rear yards and at least 3 feet from any property line, and may not sit in a recorded easement without the easement holder's written approval.
Pool barrier 5 to 6 feet high, no openings a 4-inch sphere can pass through
Self-closing, self-latching gates (double-width RV gates that aren't the only entry may instead stay padlocked)
Pool at least 3 feet from property lines, 5 feet from the street side on corner lots
Arizona state law (A.R.S. 36-1681) also sets pool enclosure requirements; HOA approval is often needed too
This is general information, not legal advice. Rules change, so confirm with Town of Gilbert Development Services before work starts.
How it works
1
Describe the pool
Four short questions: the project, the pool type, your timeline and ZIP. Contact details come last.
2
Hear from local builders
Independent pool contractors who serve Gilbert contact you to visit the yard and quote in writing.
3
Compare and decide
Compare what each quote includes (barrier, decking, equipment, permits), ask for proof of insurance and licensing, and hire whoever fits, or no one.
Building a pool in Gilbert: what's different here
Gilbert sits in the Phoenix metro area's Sonoran Desert, where summers are long and very hot and rain is scarce outside the summer monsoon. A pool here gets heavy use for much of the year, but it also loses water to evaporation and works its equipment hard, so efficient pumps, a good cover and shade near the pool are worth discussing.
Desert soils in the Valley can contain caliche, a cemented layer of calcium carbonate that is hard to dig through. Builders often can't tell how much there is until excavation starts, so ask how each quote handles rock or caliche removal.
Many Gilbert homes are in master-planned communities such as Val Vista Lakes, Power Ranch, Seville and Agritopia, often with block walls and HOA design rules. Narrow side yards can make it hard to get excavators and shells into the backyard, and sometimes part of a wall has to come down and be rebuilt. Ask builders to look at access before you sign.
Service area
Requests are welcome from across Gilbert (ZIP codes 85233, 85234, 85295, 85296, 85297, 85298) and nearby East Valley communities. Enter your ZIP in the form so builders can confirm they serve your area.
Angi's 2026 national data puts most in-ground pools between about $44,500 and $87,350, with concrete up to about $120,000. Access, caliche, barriers, decking and extras add to that. Get written quotes that list what's included.
What are Gilbert's pool fence rules?+
The Town of Gilbert requires pools to be enclosed by the house walls or a wall or fence 5 to 6 feet high with no openings a 4-inch sphere can pass through, and gates that are self-closing and self-latching.
How close to the property line can a pool be?+
In Gilbert residential districts, at least 3 feet from any property line (5 feet from the street side on a corner lot), and not inside a recorded easement without written approval.
What is caliche and does it matter?+
Caliche is a hard, cemented soil layer found in many desert soils. It can slow excavation and add cost, so ask how each builder prices it.
Which pool type is best in the desert?+
Concrete is the most common choice for custom shapes; fiberglass offers low upkeep and faster installation; vinyl is cheapest upfront. Ask builders how each holds up to intense sun and heat.
Do I need HOA approval?+
Many Gilbert communities require architectural approval for pools, walls and equipment placement. Check your HOA's rules before you sign a contract.